Выходная мощность:
1600W at 2 Ohms Stereo (per Channel)
1200W at 4 Ohms Stereo
Коэффициент демпфирования:
20Hz to 1kHz > 500
Входная чувствительность:
1.4Vrms
Входное сопротивление:
20k Ohms (Balanced)
10 kOhms (Unbalanced)
Получать:
32.9dB at 1kHz, 8 Ohm Rated Output
Частотная характеристика:
(at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Отношение сигнал / шум:
XTi1002/2002/4002: 100dB (A weighted)
XTi6002: 103dB (A weig
Коэффициент нелинейных искажений (THD):
< 0.5%
Связи:
Input Connectors: XLR, one per channel
Link/Out Connector: Loop-thru signal from i, one per channel.
Output Connectors: Two Neutrik Speakon NL4, connects to HiQnet network.
Передняя панель управления:
Level: Two front-panel rotary level controls, one for each channel
Power Switch: On/Off switch applies A
Показатели:
Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (ma, illuminates when the amplifier is ready to produce audio.
C, turns on at the threshold of audible distortion
Temp Indica, illuminates under excessive temperature conditions
Power In
Охлаждение:
Proportional speed fan with front-to-rear airflow.
Потребляемая мощность:
10.5A; no more than 38W at idle
Требования к питанию:
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Размеры:
19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Специальности:
DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating
Модель:
XTi 2 Series 4002
Аудио выходы:
Binding Post, Speakon